Prexiso T.O.2 Manual De Usuario página 17


Recharging the Ni-
MH battery pack
• The four batteries in the battery case should be of the same type.
• Do not use batteries which have different remaining capacities.
• When batteries are wet, dry them immediately, and put them out of the instru-
ment case, air-dry thoroughly.
1. Connect the charger to a power source as indicated on the label of the charger.
The green light on the charger is lit.
2. Insert the plug of the charger to the charging port of the Ni-MH battery pack. The
green light of the charger turns red, the charging process is started, after 3 to 4
hours when the red light turns green, it indicates that the charging process is
finished.
3. Insert the raised part at the bottom of
the battery case into the slot of the
right battery cover, and put the
battery case in place. Then turn the
knob and let the mark
LOCK.
point to
T.O.2 | 15