Grundig KVA 4830 MBC Manual Del Usuario página 33

CLEANING _ _______________________________
Warning
When lights up stably, it indicates that
7
the brewer is missing / installed improp-
erly. When
is flashing, it indicates
that the service door is missing/installed
improperly.
Self-Cleaning
When is flashing, it indicates that the
appliance needs to undergo self-cleaning.
The appliance will remain in the best
condition if this function is performed at least
once a month or more regularly depending
on the hardness of water used. It is also
suggested that to
1
Fully fill the water tank.
2
Adding one pack of cleaning agent
included in the box to the water tank.
Warning
Do not use vinegar or other cleaning
7
agent to do self-cleaning of this appli-
ance. The cleaning agent might damage
the appliance.
3 Plug in the appliance.
4 Place a sufficient large container under
the coffee spout.
5 In standby condition, press and hold
and strong espresso button
seconds. A beep sound will be heard
with and strong espresso button
will be flashing.
6 Press strong espresso button to confirm
undergoing the self-cleaning process. To
resume back to the standby condition,
press .
7
will be flashing indicates that the
appliance is undergoing the self-cleaning
process.
Warning
Keep skin/body away from the hot
7
water.
8 When all the water in the water tank
is being dispensed out,
espresso button
Remove all the remaining solution in the
water tank and fill the tank with normal
tap water until the max position. When
water is filled into the water tank,
goes off. Then the appliance will continue
the self-cleaning process.
9 When the self-cleaning process is
completed, the appliance will switch off
automatically.
Empty System Function
The empty system function is recommended to
be used before long period of non-use, frost
protection and before talking to repair agent.
1
In standby condition, press and hold the
and mild espresso button
5 seconds.
2
will then be flashing.
3 Remove the water tank from the appliance.
will light up stably indicates that the
empty system is under process. You can
press
resume back to the standby condition.
4
When the empty system function is
completed, the appliance will switch off
automatically.
for 5
Warning
After perform EMPTY SYSYEM FUNC-
7
TION; press the hot water button until
water can come out from spout when the
coffee maker is reused again.
Manual Rinsing
You can perform a manual rinsing cycle to
clean the coffee nozzle after use. It is also
suggested to perform a manual rinsing if
the appliance has not been used for a long
period of time.
will be flashing.
before removing the water tank to
ENGLISH
and strong
will
together for
33