Limited Warranty - dosatron D25ALN Manual De Utilización

SYMPTOM CAUSE
Dosing
Suction valve or valve
Water flowing back
seal dirty, worn, absent or
into the product tank.
wrongly fitted.
The motor piston has
stopped working.
Air tightness problem in
the suction hose.
No suction of product.
Suction hose obstructed or
strainer blocked.
Suction valve seal worn,
wrongly fitted or clogged.
Dosing piston seal wrongly
fitted, clogged or swollen.
Dosing pump body
scratched.
Leaks
Leaks close to the quick Dosing body seal
coupling ring under the damaged, wrongly
pump body. positioned or absent.
Dosing pump body
Leaks between the
seal damaged, wrongly
dosing adjustment
positioned, absent or
sleeve and the dosing
dosing pump body grooves
locker.
scratched.
Leaks between the Top cap seal damaged,
body housing and the wrongly assembled or
top cap. absent.
DOSATRON INTERNATIONAL DECLINES ALL
RESPONSIBILITY IN THE EVENT OF USE THAT IS NOT
COMPLIANT WITH THE INSTRUCTIONS FOR USE.
©
DOSATRON INTERNATIONAL S.A.S / 65
SOLUTION
To be cleaned or replaced.
See Troubleshooting Motor
piston.
Check the suction hose and
the tightening of its nuts.
Change the suction hose
when it becomes too
supple or rigid depending
on the additives dosed.
This can interfere with
the watertightness of the
connector on the Dosatron.
Clean it or replace it.
Clean it or replace it.
Clean it or replace it.
Replace it.
Position it correctly or
replace it.
Position it correctly or
replace it.
Position it correctly, clean
seal groove or replace it.

Limited Warranty

DOSATRON INTERNATIONAL
S.A.S. agrees to replace any part
recognised to be defective originally
for a period of twelve months from
the date of purchase by the initial
purchaser.
To obtain the replacement under the
warranty, the appliance or spare part
must be returned with proof of initial
purchase to the manufacturer or
authorized distributor.
It may be recognised as defective
after examination by the technical
services of the manufacturer or
distributor.
The appliance must be rinsed to
remove any chemicals and sent to
the manufacturer or to the distributor
with postage paid, then it will be
returned free of charge after repair if
it is covered by the warranty.
The purpose of operations carried
out under the warranty may not be to
extend the lifetime.
This warranty applies only to
manufacturing defects.
This warranty does not cover
defects found to be due to abnormal
©
DOSATRON INTERNATIONAL S.A.S / 66
installation of the appliance,
inappropriate use of tools, lack of
maintenance or defective installation
or environmental accidents or
corrosion by foreign bodies and
liquids found within or in proximity to
the appliance.
For the dosing of aggressive
products, please consult your
vendor before any use to confirm
compatibility with the dosing pump.
The seals (wearing parts) are not
covered under warranty, nor is
damage caused by water impurities
such as sand, minerals and any other
abrasive particles.
A filter (e.g. 300 mesh - 60 microns
depending on your water quality)
must be installed before the
appliance.
DOSATRON INTERNATIONAL
S.A.S. declines any responsibility if the
appliance is not used in compliance
with the recommendations and
tolerances in the owner's manual.
There is no explicit or implicit
guarantee relating to other products
or accessories used with DOSATRON
INTERNATIONAL S.A.S appliances.