Dimensions - dosatron D25ALN Manual De Utilización

CHARACTERISTICS
Operating flow: 10 l/h min. 2.5 m
3
Max. operating temperature: ......................................................40°C [104° F]
Operating pressure:
bars
PSI
Adjustable dosing:
%
Ratio
Concentrated product injection flow:
Min. l/h - Max. l/h
US Fl. oz/min - Mini
US GPM - Maxi
Connections (NPT/BSP male gas fittings) : .......................Ø 20x27 mm [3/4"]
Hydraulic motor capacity (every two clicks of the piston):
approx. 0.45 l [0.118 US Gallons]
IMPORTANT! The DOSATRON is not pre-set,
please refer to the chapter, ADJUSTING THE DOSING

DIMENSIONS

Diameter:
Total height:
Overall width:
Weight: ± kg [lbs]
PARCEL COMPOSITION: 1 DOSATRON/1 mounting bracket for
DOSATRON/1 suction hose for concentrate/1 strainer/
1 quick start guide
D25+ PACKAGING:
520 mm x 170 mm x 180 mm (20.5" x 6.7" x 7.1")
WEIGHT: approx. 2 kg for the 5% [~4.4 US lbs]
©
DOSATRON INTERNATIONAL S.A.S / 43
D25AL5N
/h max. [1/3 US Pint/min - 11 US GPM].
0.30 - 6
4.3 - 85
1 - 5
1:100 - 1:20
0.1 - 125
0.056
0.55
cm ["] 12.7 [5]
cm ["] 44 [17" 5/16]
cm ["] 16 [6" 5/16]
+/- 2 Kg [4.4 US Ibs]
Dosatron Technology
A unique technology associating all dosing functions
Installed on the water supply line, the Dosatron uses water pressure
as the only power source. Thus activated, it takes up the required
percentage dose of concentrate and then mixes it with the moving
water. The solution produced is then propelled downstream. The
dose of injected product is always proportional to the volume of
water going through the Dosatron, regardless of variations in flow or
pressure in the water supply line (high variations in flow and pressure
driops as result of animal behaviour during drinking).
Motor piston
Clear water
Dosing piston
Adjustment dosing (%)
ratio
Concentrate
additive
to be dosed
©
DOSATRON INTERNATIONAL S.A.S / 44
Solution
water + % product