DRILL DOCTOR 350X Guia Del Usuario página 20

Reversing or Replacing Your
Diamond Sharpening Wheel
1.
2.
3.
4.
18
Disconnect your Drill Doc-
tor, make sure machine is
cool, then remove Wheel
Access Cover.
Use wrench supplied with
your Drill Doctor to lock
sharpening wheel in place.
With Phillips-head screwdriv-
er, remove the two screws
and wheel retainer.
Remove worn wheel by twist-
ing slightly and lifting wheel
off shaft. Install new wheel
and reinstall wheel retainer
and screws. Don't over-tight-
en mounting screws. Remove
the wrench and replace the
Wheel Access Cover before
turning on the machine.
www.drilldoctor.com