DRILL DOCTOR 350X Guia Del Usuario página 15

2.
3.
White Triangle
Cam Guide
www.drilldoctor.com
Tighten
Tighten the Chuck while
checking that the insert is
touching the end of the Align-
ment Fingers. Tighten until
the bit no longer moves in the
chuck
Plunge until sharp.
Align the White Triangle on
the Chuck with the Cam
Guide on
Plunge the Chuck into the
Sharpening Port until it con-
tacts the Sharpening Wheel.
Remove the Chuck and rotate
one half-turn to the opposite
White Triangle. Plunge the
Chuck into the Sharpening
Port again to sharpen the
other side of the carbide
insert. Start
plunges. Inspect the bit.
Then sharpen more if needed.
the machine.
with four
13