Tabla de contenido
Fig. 11
(2)
2'' screws
per joint
NOTE: There must be a 1''
Nominal Gap between
back barrier boards.
Barrier Boards
1. Attach Barrier Boards as shown in (Fig. 11) and (Fig. 11a).
Note: Hardware securing 2'' x 4'' must be applied from outside the
unit, through the 1'' x 4'' support board.
[PF 3976] 2'' x 4'' x 34''
(4) [PF 3950] 1'' x 4'' x 34''
(2)
1-1/4''
screws per
joint
(6) [PF 3950] 1'' x 4'' x 34''
(2)
1-1/4''
screws per
joint
NOTE: There must be a 1-3/4''
Nominal Gap between Swing
Beam barrier boards.
21
Assembly Instructions
Fig. 11a
1-1/4'' Wood Screw
2'' Wood Screw
Tabla de contenido
