Using The Newborn Inlay; Using The Sunshade; Buckling / Unbuckling Of The Baby; Loosening The Belt System - Kiddy Evoluna i-Size 2 Manual De Uso

EN

5.2 Using the newborn inlay

The Evoluna i-Size 2 is equipped with a comfort insert for newborns.
This inlay ensures a more level position of your baby in the infant car-
rier. This comfort inlay may only be used for babies up to the age of
6 months (fig. 3). To remove the inlay, open the buckle and remove
the insert from the shoulder belts.

5.3 Using the sunshade

To extend the sunshade pull the hood towards the foot end of the car
seat. To retract the sunshade push towards the head end of the car
seat.
The sunshade is detachable. To do this, first pull the soft top from the
shell (fig. 4). Then press the sunshade release button inwards (fig. 5,
no. 1) and pull the sunshade joint off (fig. 5, no. 2). Carry out this step on
both sides.
To attach the sunshade, insert the two joints into the respective guide
rail until they are locked (fig. 6) and attach the soft top to the shell.

6. Buckling / unbuckling of the baby

6.1 Loosening the belt system

Turn the carry handle in to the carry position. Before you can adjust
the height of the shoulder belts, the belt system must be loosened.
For this purpose, keep the central adjuster pressed in the front un-
der the seating area (fig. 7, no. 1), and pull the shoulder belts (fig. 7,
no. 2) out.

6.2 Adjusting the height of the belt system

Open the front cover at the head end of the infant carrier by slightly
pressing the hooks upward. (fig. 8, no. 1), now the cover opens (fig. 8,
no. 2). Now turn the height adjuster handle 90° clockwise (fig. 9, no. 1)
11