3.4 Installing the RECARO adapter
M
1. Use the three self-tapping screws (2) from the installation kit to secure the cover plate (1) on the
adapter (T25 Torx adapter).
2. Fit the edge protector profile (3) from the installation kit on the adapter.
N
3. Screw the 24V socket (1) into the adapter (SW24 adapter).
4. Screw the control unit holder with two screws (2) to the adapter (T30 Torx adapter)
5. Tightly screw the footwell ventilation air outlet (4) with three screws (3) (T20 Torx adapter).
6. Refit the footwell ventilation air grill (if removed previously).
7. Fit the original console's edge protector profile (5).
RECARO Automotive Seating
1 Adapter plate
2 Adapter plate screws - M5 x 14 screws
from installation kit
3 Edge protector profile from installation
kit
1 24V socket
2 Control unit holder screws
3 Footwell ventilation screws
4 Air outlet
5 Edge protector profile
Page 15 of 31