Hitachi P42H401 Manual Del Usuario página 36

Video
Aspect
Use this function to select the Picture Format Aspect
Ratio.
Auto Aspect
Automatically adjust the Aspect Ratio depending on
the input signal to fill the screen.
Mode
M anually select the Aspect Ratio.
Vertical Position
This function allows you to select when aspect style is
either 4:3 EXPANDED/ZOOM1/ZOOM2 or 16:9 ZOOM. Vertical position can be changed with these modes.
For example, it will be useful for centering the picture area at both the top and bottom of the picture with 480i/
/480p signal. Adjustable range is -10 (video center is toward bottom of screen) to +10 (video is toward top of
screen).
1. Use the CURSOR PAD or
2. Press the CURSOR PAD
3. Press the EXIT to quit the MENU, or select ASPECT to return to the main menu.
NOTE: Vertical Position will not be available in 4:3 Standard and 16:9 Standard modes.
Reset Video Settings
This function allows you to Reset the Video Menu Settings of the present input and return it to the Day-Dynamic
VIDEO mode.
1. Use CURSOR PAD , or CHANNEL UP/DOWN
buttons to highlight functions.
2. Press the SELECT button or CURSOR PAD
select Reset Video Settings.
3. Use the CURSOR PAD to access at the Reset
softkey.
4. Press the SELECT button to Reset the Video
Settings.
You can customize each of the Video Inputs to your
preference to increase viewing performance and
pleasure, depending upon the video program being
viewed. If RESET is selected, only the selected Input will
reset to the initial conditions as explained above.
If RESET is selected in Input 1, only Input 1 will return to
factory conditions.
36
OR
to to select menu item.
or to adjust the function.
to
OR
Video
Aspect
Auto Aspect : On
Mode 16:9 Standard1
Vertical Position : 0
Move Return
SEL
Video
Cable
Color Temperature High
Black Enhancement High
Contrast Mode Dynamic
Noise Reduction Low
MPEG NR Off
Auto Movie Mode Off
Black Side Panel Off
Aspect
Reset Video Settings
Move Return
SEL
Video
Reset Video
Select "Reset" to return to Video menu settings
on this Input to the original factory settings.
Reset
Move SEL Return