Detection Range; Regulatory Information; Contact Information - Interlogix VVS300 Plus Serie Instrucciones De Instalación

(8) Clamp
(9) Area for mounting the VVT705 test transmitter
(10) Fixing bolt
(11) Mounting plate VVM300
(12) Expander bolt
(13) Test transmitter VVT705
Using the mounting plate VVM300 as a template
A Holes for VVS300/320 Plus and VVS302/322 Plus
B Holes for Securitas SSD70
C Holes for Cerberus Alarmcom detectors
D Hole for expansion plug or recess mounting box
E Holes for Securitas 2000
F Template and mounting holes for test transmitter VVT705
G Holes for accessories.
Figure 4: Mounting the detector directly on a metal surface
without using a mounting plate
Figure 5: Mounting the detector on a metal surface using the
VVM304 weld-on plate
First weld points 1, 2, 3, and 4. Then weld seams 5 and 6.
Figure 6: Mounting on concrete
Always use a VVM300 mounting plate. The expansion plug
must penetrate at least 50 mm into the concrete. Please follow
the steps shown in Figure 6 if you are installing the test
transmitter VVT705.
Note: For the equipment to conform to CEI standard 79-2, the
VVT705 test transmitter must be installed.
Figure 7: Control and function test
Using a voltmeter, check the background signal level in the
detector to prevent nuisance alarms. Set the sensitivity to
Gmax during the test.
VVS300/320 Plus VVS302/322 Plus
0.7 V 0 V
1.4 V 2 V
Note: Try to remove the source of ambient noise instead of
reducing the range.
Functional testing with hand tester VVT310 (1) and mechanical
tool (2):
•
VVS300/320 Plus: Alarm in 60 s. Alarm after 5 blows.
•
VVS302/322 Plus: Alarm in 45 s.

Detection range

Table 1: Detection range (in meters)
Material Sensitivity
setting
Concrete
Steel 1/Gmax
Brick
Concrete
Steel 2/Gref
Brick
Concrete
Steel 3/Gmin
Brick
P/N 1038579 (ML) • REV D • ISS 19APR19
Measure
None
Reduce range/remove
source
Thermal Diamond Drilling
lance disk
4 14 14
8 14 14
3 8 8
3 9 9
4 9 9
1 6 6
2 6 6
2 6 6
—
4 4
Material Sensitivity
setting
Concrete
Steel 4
Brick
Concrete
Steel 5
Brick
Specifications
Input power 9 to 15 V DC, 2 V max. ripple pp
Current consumption 8.6 mA nom.
Alarm output Form A solid state relay, series resistance
35 Ω max.
Alarm indication LED-ind. output 3
Sensitivity 5 steps of 6 dB each
Range See Table 1 above
Temp. 84°C, drill shield, opening/pry-off
Sabotage protection
contact
Low voltage alarm 7.5 V
−20 to +55°C
Temperature limits
Dimensions 100 x 80 x 33 mm
Colour Teknos BE 8086 (grey)
Weight 390 g

Regulatory information

Manufacturer
PLACED ON THE MARKET BY:
UTC Fire & Security Americas Corporation, Inc.
3211 Progress Drive, Lincolnton, NC, 28092, USA
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Product warnings THESE PRODUCTS ARE INTENDED FOR SALE
and disclaimers TO AND INSTALLATION BY QUALIFIED
PROFESSIONALS. UTC FIRE & SECURITY
CANNOT PROVIDE ANY ASSURANCE THAT
ANY PERSON OR ENTITY BUYING ITS
PRODUCTS, INCLUDING ANY "AUTHORIZED
DEALER" OR "AUTHORIZED RESELLER", IS
PROPERLY TRAINED OR EXPERIENCED TO
CORRECTLY INSTALL FIRE AND SECURITY
RELATED PRODUCTS.
For more information on warranty disclaimers and
product safety information, please check
https://firesecurityproducts.com/policy/product-
warning/
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
www.recyclethis.info

Contact information

www.utcfireandsecurity.com or www.interlogix.com
For customer support, see www.utcfssecurityproducts.eu
Thermal Diamond Drilling
lance disk
1 5 5
1 5 5
—
3 3
—
4 4
—
4 4
—
2 2
or scan the QR code.
3 / 12