Maintenance And Servicing - pellenc FIXION Guia Del Usuario

SAFETY INSTRUCTIONS
USING AND SERVICING THE TOOL.
1– Do not force the tool. Use a tool suited to the job.
2– Do not use the tool if the switch does not allow it to be switched on and off.
3– Disconnect the battery connector from the tool before any adjustment, accessory change or putting the
tool away.
4– When not in use, keep tools out of reach of children, and do not allow persons to use the tool if they do
not know how to use it and if they are not aware of these instructions.
5– Comply with the tool servicing instructions. Check that the moving parts are not misaligned or jammed,
that there are no broken parts or that there is no other condition which could affect the operation of the tool.
If there is damage, have the tool repaired before using it.
6– Use the tool, accessories, etc. in compliance with these instructions, taking into account the working
conditions and the work to be performed.
7– Never carry the tool suspended from the power cord.
8– Do not store the tool in a damp location.

MAINTENANCE AND SERVICING

1– Keep the original packaging in the possible event of shipping the tool for overhaul or repair.
2– Have the tool serviced by an approved PELLENC dealer, using only identical spare parts.
5