Adjusting The Air Flow Direction - kmk R101 Manual Usuario

2. To set the stopping time.
2.1 Push the TIMER OFF button and the remote controller will show TIMER OFF, the last set time for the stopping
operation and the signal "h" will be shown on the DIGITAL DISPLAY area. You are now ready to reset the time of the
STOP operation.
2.2 Push the TIMER OFF button again to set the time you want to stop the operation.
2.3 After setting the TIMER OFF. there will be a one-half second delay before the remote controller transmits the signal to
the air conditioner. Then, after approximately another 2 seconds, the signal "h" disappears and the set temperature will
reappear on the digital display.
3. Set the starting & stopping time
3.1 Push the TIMER ON button, the remote controller will show TIMER ON, the last set time for START operation and the
signal "h" will be shown on the DIGITAL display area. You are now ready to readjust the TIMER ON to start the operation.
3.2 Push the TIMER ON button again to set the time you want to start the operation.
3.3 Push the TIMER OFF button, the remote controller will show TIMER OFF, the last set time for STOP operation and
the signal "h" will be shown on the DIGITAL display area. You are now ready to reset the time to STOP operation.
3.4 Push the TIMER OFF button again to set the time you want to stop the operation.
3.5 After setting the TIMER, there will be a one-half second delay before the remote controller transmits the signal to the
Air Conditioner. Then , after approximately another 2 seconds, the set temperature will reappear on the digital display.
Change the TIMER
To change the TIMER ON/OFF time, just press the corresponding TIMER button and reset the time.
NOTE: The setting time is relative time. That is the time set is based on the delay of the current time.
WARNING
1. Be sure there are no obstacles between the remote controller and the receiver of indoor unit otherwise the air
conditioner will not work.
2. Keep the Remote Controller away from any liquids.
3. Protect the remote controller from the high temperatures and exposure to radiation.
4. Keep the indoor receiver out of direct sunlight or the Air Conditioner may malfunction.
5. Keep Remote Controller away from EMI (Electro-Magnetic Interference) supplied by other household appliances.
6. When replacing batteries, do not use old batteries or a different type battery. This may cause the remote control to
malfunction.
7. If you do not use the remote controller for several weeks remove the batteries. Otherwise battery leakage may damage
the remote controller.
8. The average battery life under normal use is about 6 months.
9. Replace the batteries when there is no answering beep from the indoor unit or if the Transmission Indicator light fails to
light.
4. ADJUSTING THE THE AIR FLOW DIRECTION
Horizontal Airflow (AUTO)
Horizontal Airflow may be adjusted by moving the vertical louvers left and right. Press the"AUXILIARY FUNCTION" button
on the control panel of the unit to select the "SWING" feature to make the louvers move, repeat the operation again to
stop.
Note: Do not touch the vertical louvers with hand!
Vertical Air flow (MANUAL)
Vertical Airflow may be adjusted by horizontal louvers. Hold the edge of a horizontal louver and move it up and down to
adjust vertical air flow.
13