Assign Ip Addresses In Multiple Devices; Set The Password - Axis M11 Serie Guia De Instalacion

AXIS M11 Series

Assign IP addresses in multiple devices

AXIS Camera Management speeds up the process of assigning IP
addresses to multiple devices, by suggesting IP addresses from a
specified range.
1. Select the devices you wish to configure (different models can be
selected) and click the Assign IP button
Select Assign the following IP address range and enter the range
2.
of IP addresses, the subnet mask and default router the devices will
use.
Click the OK button.
3.

Set the password

To gain access to the product, the password for the default administrator
user root must be set. This is done in the 'Configure Root Password'
dialog, which is displayed when the AXIS M11 Series network camera is
accessed for the first time.
To prevent network eavesdropping when setting the root password, this
can be done via an encrypted HTTPS connection, which requires an
HTTPS certificate (see note below).
To set the password via a standard HTTP connection, enter it directly in
the first dialog shown below.
To set the password via an encrypted HTTPS connection, follow these
steps:
Click the Create self-signed certificate button.
1.
Provide the requested information and click OK. The certificate is
2.
created and the password can now be set securely. All traffic to and
from the AXIS M11 Series is encrypted from this point on.
Page 9
.