Storage; Spare Parts - Cosmo PTP 180 Manual De Uso Y Mantenimiento

5.3.

STORAGE

It is a good use not to wait for using the machine to carry out repairing and maintenance.
To repair and to replace the parts that are broken or damaged before the storage, in order to have
always the machine ready for being used. To store the machine in a sheltered place away from
atmospheric agents and protect it in order to avoid deteriorations.
The fertilizers are generally corrosive. For this reason it is important that no particles of fertiliser
remains on the machine for long period of time.
Before storing the machine for long periods, it is opportune to operate as follows:
- accurately wash the machine and the inside of the hopper;
- to carry out a general control by sight of the machine in order to check eventual structural damages,
to find eventual deep abrasions on the paint;
- to verify that the safety pictograms are present in their positions, that they are integral and
readable, and in case they are deteriorated or unreadable, carry out immediately their substitution
(see par. 3,1);
- to grease all the mechanical parts (to see par. 5,1);
- store, if possible, the machine in a sheltered place.
5.4.

SPARE PARTS

For the replacement of parts of the centrifugal pull type spreader Mod. PTP, the customer must use just
original parts, ordering them directly to the manufacturer of the machine or to authorized dealers.
Carrying out the order, it is necessary to specify what the identification label brings, in particular:
- serial number;
- model;
- manufacturing year;
- number of frame.
Centrifugal Spreader mod. PTP 23