Storage; Spare Parts - Cosmo P180 Manual De Uso Y Mantenimiento

6.3. 6.3.

STORAGE

STORAGE
It is a good use not to wait for using the machine to carry out repairing and maintenance. To repair
and to replace the parts that are broken or damaged before the storage, in order to have always the
machine ready for being used.
To store the machine in a sheltered place away from atmospheric agents and protect it in order to
avoid deteriorations.
The fertilizers are generally corrosive. For this reason it is important that no particles of fertiliser The fertilizers are generally corrosive. For this reason it is important that no particles of fertiliser
remains on the machine for long period of time. remains on the machine for long period of time.
Before storing the machine for long periods, it is opportune to operate as follows:
- wash accurately the machine and the inside of the hopper;
- to carry out a general control by sight of the machine in order to check eventual structural damages,
to fi nd eventual deep abrasions on the paint;
- to check that the safety signals are presents in their positions, that they are integral and readable,
and in case they are deteriorated or unreadable, carry out immediately their substitution (see par.
3.1);
- to grease all the mechanical parts (to see par. 5.1);
- to store, if possible, the machine in a sheltered place.
6.4. 6.4.

SPARE PARTS

SPARE PARTS
For the replacement of parts of the centrifugal spreader Mod. P-PL, the customer must use just original
parts, ordering them directly to the manufacturer of the machine to authorized dealers.
Carrying out the order, it is necessary to specify what the identifi cation label brings, in particular:
- serial number;
- model;
- manufacturing year;
- number of frame.
Centrifugal fertilizer spreader mod. P - PL 25