Cosmo PTP 180 Manual De Uso Y Mantenimiento página 13

Operation of the machine
• Make a check of the machine before switching it on. Start to work only if the machine is in perfect
conditions.
• Before using the machine, please be sure that all the safety devices are correctly placed and in good
state; in case of breakdowns or damages to the protections, please replace them immediately.
• Before every use of the pull type spreader, please always check the wear of the vanes and of the
spreader disc. Check that all the fixing components (screws, bolts etc.) are in and fixed.
• The machine must never be unattended when it is moving.
• Keep always the machine in good operating conditions and make regularly the maintenance.
Transfer on the road
Remember that during moving on public roads, special attention must be done, besides to possible and
special regulations noted on the registration book of the tractor, choosing an appropriate speed especially
when the street is crowded, winding or sloping. If the pull type spreader hides, with its shape, the back
signalling lights of the tractor, it is necessary to put a lights bar and/or some back signalling signs.
Engage the axle with the pin, so that the spreader can be set
in action by the turning wheels, only in the moment in which
the spreading operation has to be carried out.
Centrifugal Spreader mod. PTP
ATTENTION!
During work, please be sure that for a radius of 50 meters there are not any person
or animals. When you work in proximity of roads or public places, it is ABSOLUTELY
OBLIGATORY to keep away persons and to increase the precautions.
ATTENTION!
Anybody who comes up to the machine is in a danger area, therefore he becomes
"AN EXPOSED PERSON". The operator must prevent anybody to come into the
danger area and to work with the maximum caution. If somebody comes up,
please stop immediately the tractor engine.
ATTENTION!
Please follow scrupulously the Highway code in force in the country of use.
During moves on public roads, it is obligatory to empty the hopper.
13