Pull Type Spreader Use; Connections - Cosmo PTP 180 Manual De Uso Y Mantenimiento

Abonadora centrifuga arrastrada
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

4. PULL TYPE SPREADER USE

Recommendations for a correct distribution
• Please test always the kg/ha that you wish to spread before starting to work.
• Use a fertilizer in perfect conditions: a humid fertilizer could not be spreaded uniformly and correctly.
• Avoid to spread the fertilizer during windy days, in order to improve the uniformity of the distribution.
4.1.

CONNECTIONS

The pull type spreaders mod. PTP can be hitched to every type of tractor or atv-quad with ball of 45
millimetres (13/4") or 50 millimetres (2").
To make the connection, it is necessary to put the ball hitch in the coupler on the pull type spreader,
locking it pushing the lock handle towards the bottom.
Check and regulate the length of the regulation tongue rod, so that the spreader disc is, as parallel as
possible, to the ground, in order to get a uniform and regular distribution of the fertilizer.
Unscrew the locking bolt, as shown with the arrow in the picture below and move the rod in the optimal
position, in correspondence of the present holes and lock the bolt in the new position.
Shaft regulation bar
Centrifugal Spreader mod. PTP
ATTENTION!
Before use, please check that gears are adequately greased (see paragraph 5.1).
ATTENTION!
During the use of the machine, please be sure that for a radius of 50 meters there
are not any person or animals. If somebody comes up, please stop immediately
the tractor engine.
Correct position of the spreading disc
15

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Ptp 300

Tabla de contenido