H Ow To Adjust The Spreading - Cosmo PTP 180 Manual De Uso Y Mantenimiento

4.2.2. h
ow to adjust the spreadiNg
The fertilizer spreading is regulated through the regulation lever that moves the opening section on
the bottom of the hopper. In order to carry out the regulation, after having consulted the spreading
table, according to the type of product to spread and to the ATV speed, it is necessary to move the lever
"A" along the graduated scale "E" and blocking it in the chosen position with the pin "D".
In order to spread from both sides (ref. I), "A" and "B" levers must be in the same position, connected
through grip handle "C".
In order to carry out the spreading only through the left side (ref. II), it is necessary to disconnect
the two levers removing the "C" grip handle, to set the lever "B" in the chosen position, given by the
spreading chart, and to bring the lever "A" towards the higher part (position 1) in order to close the
shutter of the right side.
In order to spread only on to the right side (ref. III) you have to move the lever "B" up, (in position 1)
and regulate the quantity to spread with the lever "A".
Centrifugal Spreader mod. PTP 17