Genie Z-62/40 Manual Del Operario página 9

Primera edición • Primera impresión
DANGER
3
Platform uphill:
Stop all movement.
1 Lower primary boom.
2 Lower secondary boom.
3 Rertact primary boom.
Tip-over Hazard
3
If tilt-alarm
sounds, unit is
on a severe
• Read operator's
slope. Death or
Platform downhill:
manual before
serious injury
1 Retract primary boom.
attempting to move
will result.
2 Lower secondary boom.
machine.
3 Lower primary boom.
114397 A
CAUTION
WARNING
Drive Direction Hazard
Machine can move in opposite direction of
joystick movement. Movement in an unplanned
Tip-over Hazard
direction can result in death or serious injury.
Tipping over this machine will
result in death or serious injury.
Always match the color-coded direction arrows
on platform controls and drive chassis to
Only raise the platform when the
determine direction of machine travel. Read
machine is on a frm, level surface .
and understand operator's manual.
DANGER
Maintain required clearance.
Line Voltag e Required Clearance
0 o t 5 0 K V
Electrocution Hazard
50 to 200KV
Death or injury can result from contacting electric
200 to 350KV
power lines.
350 to 500KV
Always contact the electric power line owner. The
500 to 750KV
electric power shall be disconnected or the power
lines moved or insulated before machine operations 750 to 1000KV
begin.
114390 A
N.º de pieza 1257652SP
DANGER
Tip-over Hazard
Tipping over the machine will result
in death or serious injury.
WARNING
Crush Hazard
Contact with overhead obstructions
could result in death or serious injury.
Keep away from overhead obstructions
or other possible hazards.
218559 A
WARNING
Improper operation or
maintenance can result in
serious injury or death.
1 0 t f 3 0 . m
15 ft 4.6 m
20 ft 6.1 m
25 ft 7.6 m
35 ft 10.6 m
45 ft 13.7 m
Maximum Capacity:
Maximum
500 lbs / 227 kg
allowable wind
speed:
Occupants and
28 mph /12.5 m/sec
equipment must not
exceed
500 lbs / 227 kg
Maximum
Occupants: 2
Read and understand Operator's
Manual, Responsibilities Manual and
Safety Manual and all safety signs
before using or maintaining machine.
If you do not understand the
information in the manuals, consult
your supervisor, the owner or the
manufacturer.
28236 D
DANGER
Tip-over Hazard
Altering or disabling limit
switches can result in machine
tip-over. Machine tip-over will
result in death or serious injury.
Do not alter or disable limit
switch(s).
31060 C
Z-62/40
Manual del operario
Seguridad general
Maximum
Allowable
Manual Force:
150 ft lbs / 667 N
218549 A
7