Tabla de contenido
Idiomas disponibles
Idiomas disponibles
USER MENU PARAMETERS LIST
• Unit Measur temp. [°C,°F] (default °C) Celsius / Fahrenheit degrees instrument setting
• Incubation temp. (default 30.0)
• Alarm temperatur (default 40.0)
• Incubation humid (default 40)
Speed fan regulation (ref. mod. MG 140/200 rural)
Press the "Fan" key to enter the fan speed set up page, choose the set value 1,2 or 3 by the keys
the key "Fan".
Speed 1 = lower fan speed suggested for breeding live animals in the first week of life.
Speed 2 = medium fan speed suggested for hatching period (last 2 days)
Speed 3 = maximum speed suggested during incubation period
Technical menu
Pressing simultaneously both keys
To view a set value press the " SET key and, if required, change it by using the keys
The electronic instrument will automatically exit the programming menu if no keys are pressed for longer than 25 Sec.
Technical menu parameters list
• Unit Misura temp
• Inc. temp. min.
• Inc. temp. max.
• Alarm temp. min.
• Alarm temp. max.
• Alarm temp.hyst.
• Calib temp.probe
• Humidity minimum
• Humidity maximum
• Humidity hyst.
• Cal.humid. probe
• Language
• Type of fan
• Buzzer Mode
[0 .. 2] (default 2)
0 = Buzzer off
1 = Buzzer on for pressing the keys
2 = Buzzer on when pressing keys and in case of high temperature alarm
18
Chasse
This parameter determines the operating temperature during incubation period. The range of pos-
sible temperature setting values is limited by the parameters "Inc.temp.min." and "Inc.temp.max."
shown in the technical menu.
When the maximum temperature limit set up by the user in this parameter is reached, the emergency
relay will be switched on in order to warn temperature abnormalities.
This output will remain active until the temperature drops below the set value –"Ist.temp.allarm.".
The range of possible temperature setting values is limited by the parameters "Temp.alarm.min." and
"Temp.alarm.max." shown in the technical menu.
This parameter allows relative humidity settings during incubation period. The range of possible
humidity setting values is limited by the parameters "Min.humidity" and "Max.humidity" shown in
the technical menu.
+
, you will access the "Technical menu".
[°C,°F] (default °C)
[5,0 .. 75,0] (default 25.0) Used to limit the minimum acceptable temperature value in the "incubation
[5,0 .. 75,0] (default 40.0) Used to limit the maximum acceptable temperature value in the "incubation"
[5,0 .. 75,0] (default 30.0) Used to limit the minimum acceptable value in the parameter "alarm tempera-
[5,0 .. 75,0] (default 40.0) Used to limit the maximum acceptable value in the parameter "alarm tempe-
[0,1 .. 5,0] (default 0.1)
[-3,0 .. +3,0] (default 0.0) Used to calibrate the temperature value detected by the probe
[10 .. 90] (default 40)
[10 .. 99] (default 80)
[1 .. 20] (default 1)
[-5 .. +5] (default 0)
[0 .. 1] (default 0)
[1 .. 4] (default 1)
Pêche
Loisir et nature
and
Celsius / Fahrenheit degrees instrument setting
parameter" on the User Menu
parameter" on the User Menu
ture" on the User Menu
rature" on the User Menu
Used to set up with the maximum accuracy the alarm temperature hysteresis
Used to limit the minimum acceptable value in the parameter "incubation
humidity" on the User Menu
Used to limit the maximum acceptable value in the parameter "incubation
humidity" on the User Menu
Used to set up with the maximum accuracy the humidity regulation hysteresis
Used to calibrate the humidity value detected by the probe
Used to select the languages shown on the display (Italian / English)
Used to set up the fan motor type controlled by the instrument
Used to set up the buzzer operating mode.
Fan motor type
1
2
3
and
and confirm pressing again
and memorize by "set".
Incubator model
MG50-MG70-MG100-MG140
MG244
MG500-432-576-720-MG400H
www.ducatillon.com
Jardin
Élevage
Tabla de contenido
