Dörr DLP-2000 Manual De Instrucciones página 10

05 | ASSEMBLY
1. Fix the 4 reflector mats on the barndoors (3) using the Velcro straps.
2. Mount the continuous light to a light stand (optionally available from DÖRR).
06 | OPERATION
06.1 Operation with AC power supply
Make sure that the On/Off switch (7) is at the position "0" (=Off). Connect the supplied AC power supply with the DC power
1.
jack (6). To release the AC power supply press the locking pin at the power plug (13).
2. Turn the On/Off switch (7) to the position II (= operation with AC power supply).
06.2 Operation with V-Mount Li-Ion Battery (optional)
1. Make sure that the On/Off switch (7) is at the position "0" (=Off). Slide the battery into the V-shaped battery mount (10) until
it clicks into place.
Turn the On/Off switch (7) to the position I (=battery operation).
2.
3. To remove the battery, press the battery lock (12).
V-Mount Li-Ion batteries optionally available from DÖRR:
DÖRR Compact V-Mount Li-Ion Battery CVL-98 14.8V, 98Wh
Item No. 980716
07 | SETTINGS
Adjust the requested colour temperature and illuminance by turning the dial controls 8 and 9 or by pressing the buttons B and D (▲
or ▼) at the touch display (5). Current value will be shown in the display (5).
07.1 To create warmest light
Turn the colour temperature dial (8) counter clockwise to its left or press the touch button B (▼). Turn the illuminance dial (9)
clockwise to its right or press the touch button D (▲).
Display shows:
07.2 To create coolest light
Turn the colour temperature dial (8) clockwise to its right or press the touch button B (▲). Turn the illuminance dial (9) clockwise to
its right or press the touch button D (▲).
Display shows:
07.3 To create daylight temperature
Turn the illuminance dial (9) clockwise to 100% or press the touch button D (▲). Turn the colour temperature dial (8) or press the
touch button B (▲ or ▼) until display shows 5.000 K (daylight temperature).
10
3.000K 100%
8.000K 100%
doerr-foto.de