Dryer Use; Loading Guide - Kenmore 110.8656 Serie Manual De Uso Y Cuidado

DRYER USE
MODIFIERS & OPTIONS
STATUS
Power
Wet
pomp?
Cool Down (jL _
Clothes Dry _ _ More
WrinkleGuard O _ Normal
O Less
Controls Locked _
%J
Cheek Lint Screen _/
Dryness
Level
_Jlo CYCLES ONE"
AUTO
CYCLES
Delicate
TIMED
Casual CYCLES
Normal Timed
Dry
Jeans
Express
Dry
Touch Up
Cycle
I igh
Medium High
Medium
Low
_ _xtra Low
_) Air Only
©
Temperature
ADSTSIS_ C_CES
U_L¥
Wrinkle Guard
CS/cle Signal
LOCKiUNLOCKCONIR_L_
Explosion Hazard
Keep flammabme materiams and vapors, such as
gasoline, away from dryer,
Do not dry anything that has ever had anything
fiammabme on it (even after washing),
Failure to follow these instructions can resumt in death,
expmosion, or fire,
Fire Hazard
No washer can completely remove oil
Do not dry anything that has ever had any type of oH on
it (including cooking oils),
Items containing foam, rubber, or plastic must be dried
on a cmothesmine or by using an Air Cycme,
Faiiure to follow these instructions can result in death
or fire,
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
Follow these basic steps to start your dryer. Please refer to
specific sections of this manual for more detailed information.
1. Clean lint screen before each load. See "Cleaning the Lint
Screen."
2. Place laundry into dryer and shut door. See "Loading Guide."
3. Press POWER.
4. Select an Auto or Timed Cycle, The preset settings for Auto
or Timed Cycles will illuminate. The estimated (auto cycle) or
actual (timed) cycle time (in minutes) will show in the display,
NOTE: A default time is displayed when an automatic cycle is
selected. During the first few minutes of the drying process,
the cycle time may automatically vary from the default time
based on the size and fabric type of the load. Toward the end
of the drying process, the estimated time display will adjust
again, showing the final drying time.
To use an Auto Cycle
• Select an Auto Cycle. Auto cycles are preset to Normal.
• Select DRYNESS LEVEL to adjust how dry you want the
load. As the cycle runs, the control senses the dryness of
the load and adjusts the time automatically for the
selected dryness level.
To make changes to the Dryness Level and/or Options
during an Auto Cycle:
•
Press STOP once.
Adjust Dryness Level and/or Options.
NOTE: Dryness Level selections can be made only while
using Auto Cycles. Selecting More, Normal or Less
automatically adjusts the sensed time needed.
More
Normal
Less
©
Dryness
Level
AUTO CYCL[S ONLY
Auto Dry cycles take the guesswork out of drying time
and enhance fabric care. The amount of time that is
displayed is the estimated time remaining in the cycle.
20