Options; Modifiers - KENMORE ELITE 110.8772 Serie Manual De Uso Y Cuidado

Rack Dry
Press the Rack Dry button to use this cycle with the drying rack
to dry clothes or items with low heat without tumbling. See
"TUMBLE FREE
TM
Heated Dryer Rack."
Timed Preset Cycle Settings
Timed Cycles Default Default Time
Load Type Temperature (Minutes)
TIMED DRY High 40
Heavyweight, bulky items,
bedspreads, work clothes
EXPRESS DRY
TM
High 23
Small loads
RACK DRY Low 30
Dry without tumbling
You can customize your cycles by selecting options. Not all
Options are available with all cycles. Current selections will glow
green. If an option is unavailable with a selected cycle, the light
will not illuminate when pressed and an error sound will be heard.
OPTIONS
Wrinkle
Guard 150
Damp Dry 0
Sigma[
ALPO [_"CLES ONLY
Bu_ton
Sour_ds
Drum Light 0
WRINKLE GUARD _
WRINKLE GUARD ® helps smooth out wrinkles that form when
you cannot unload the dryer promptly at the end of a cycle.
During this option, the dryer stops tumbling and then tumbles
again for a brief period.
• Press WRINKLE GUARD _ to get up to 21/2hours of heat-free,
periodic tumbling at the end of a cycle.
• Stop WRINKLE GUARD ® at any time by pressing WRINKLE
GUARD ® or opening the dryer door.
• For the Casual cycle, WRINKLE GUARD ®is preset to ON. The
other cycles will retain the WRINKLE GUARD ®setting. For
example, if you select WRINKLE GUARD ® in the Normal
cycle, WRINKLE GUARD ®will be on the next time you select
the Normal cycle.
NOTE: If you do not select WRINKLE GUARD ® , the dryer stops
after cool down.
Damp Dry Signal
Select the Damp Dry Signal to alert you that your clothes are
approximately 80% dry. This is useful when you want to remove
lightweight items in a mixed load to avoid overdrying or remove
partially dry items that may need ironing.
The Damp Dry Signal is useful when drying bedsheets/linens in a
mixed load or large items in the "Bulky/Bedding" cycle. When the
signal goes off, open the door to stop the dryer, rearrange the
load inside the dryer, close the door and restart the dryer to finish
the drying cycle. Rearranging the load will aid in the drying
process.
For the "Bulky/Bedding" cycle, the Damp Dry Signal is preset to
ON.
NOTE: The Damp Dry Signal is available only with the Auto
Cycles.
Button Sounds
You can change the volume of the sound of the beeps. Press
BUTTON SOUNDS until the desired volume (Loud, Soft or Off)
glows. The Power and Cancel buttons will still beep softly when
the Button Sounds volume is set to Off.
Drum Light
Press Drum Light to turn on the light inside the dryer drum.
During a cycle, if Drum Light is selected, the drum light turns on
and will remain on until DRUM LIGHT is pressed again, the door
is open and closed, or the door is left open for 5 minutes.
When the dryer is not running, the drum light will turn on when
DRUM LIGHT is pressed or the dryer door is opened, and it will
remain on until the dryer door has been open for 5 minutes, the
dryer door is closed or DRUM LIGHT is pressed again.
Press DRUM LIGHT at any time to turn the drum light ON or OFE
Use Modifiers to select time and temperature for the Touch Up
Cycle. You may select dryness level for Automatic Cycles. Not all
Modifiers are available with all options and cycles. Available
modifier settings will glow amber. Current selections will glow
green. If a modifier is unavailable with a selected cycle, the light
will not illuminate.
Time
Press MORE TIME or LESS TIME until the desired drying time is
displayed. The time cannot be changed with Auto Cycles.
Temperature
Press TEMPERATURE until the desired temperature setting
glows. Temperature modifiers cannot be used with the Auto
Cycles or with Rack Dry or Timed Dry/Air Dry cycles.
Medium High
Medium
Low
Extra Low
Air Dry
ADJUSTS T_MED CYCLES
24