Figure 2. Alignment Of The Lens, Face Ring, Housing And Clamps For Pool White Lights - Jandy Pro Serie Operación Manual

Jandy Pro Series Underwater Pool and Spa White Lights
®

Figure 2. Alignment of the Lens, Face Ring, Housing and Clamps for Pool White Lights

WARNING
Use only the special pilot screw provided with this
underwater light. This screw mounts and electrically
grounds the housing securely to the mounting ring
and wet niche. Failure to use the screw provided
could create an electrical hazard, which could result
in death or serious injury to pool or spa users,
installers or others due to electrical shock.
7. If pool or spa is empty, fill pool or spa until the
underwater light is completely submerged in
water before operating the light for more than 10
seconds. Turn on main switch or circuit breaker, as
well as the switch, which specifically operates the
underwater light, to check for proper operation.
WARNING
Never operate this underwater light for more than
10 seconds unless it is totally submerged in water.
Without total submersion, the light assembly will get
extremely hot, which may result in serious burns
or in breakage of the lamp or lens. This may result
in serious injury to pool or spa users, installers, or
bystanders or in damage to property.
Align arrow of the lens
with pilot screw
|
Operation Manual
Align pilot screw with arrow
located on fixture label
Page 7
ENGLISH