GE JVW5301 El Manual Del Propietario página 10

Ocultar thumbs Ver también para JVW5301:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

tf)
.X:
O_
Z
u
Z
_J
C}
Z
<I:
Lights {GlassModels PVW73010 PVW7361)
^_CAUTION: A,ow , ghts
to coo_ before
touching.
To change the lights:
1. Before attempting to replace the lights, make sure that
the light switch is turned off.
2. Wear gloves. Do not touch the light with your bare
fingers. Skin oils can cause early light failure. Wear
clean gloves or use a paper towel to handle the light.
3. Using a flathead screwdriver, unclip the metal trim ring
from the lighting support.
4. Remove the light by pulling towards the front of the
hood. Replace it with a new G4 20W Clear Halogen
Capsule light by inserting the two stakes into the holes
and pushing towards the back of the hood to secure
the light.
5. Reinsert the metal trim ring by lining up the two side
holes on the lighting support with the two tabs on the
trim ring, and push upward.
10
_9
80760
Tabla de contenido
loading

Este manual también es adecuado para:

Jvw5361Pvw7301Pvw7361

Tabla de contenido