BZ-TECH D-6448 Manual De Instrucciones página 284

Programming Guide S-100W - Ver. 1.0
Code 128 Emulation
When this parameter is enabled, the device transmits data from certain MicroPDF417
symbols as if it was encoded in Code 128 symbols. Transmit AIM Symbology Identifiers must
be enabled for this parameter to work. If Code 128 Emulation is enabled, these MicroPDF417
symbols are transmitted with one of the following prefixes:
]C1 if the first codeword is 903-907, 912, 914, 915
]C2 if the first codeword is 908 or 909
]C0 if the first codeword is 910 or 911
If disabled, they are transmitted with one of the following prefixes:
]L3 if the first codeword is 903-907, 912, 914, 915
]L4 if the first codeword is 908 or 909
]L5 if the first codeword is 910 or 911
Scan a bar code below to enable or disable Code 128 Emulation.
Enable Code 128 Emulation
Disable Code 128 Emulation
Data Matrix
To enable or disable Data Matrix, scan the appropriate barcode below.
Enable Data Matrix
Disable Data Matrix
283