BZ-TECH D-6448 Manual De Instrucciones página 209

Programming Guide S-100W - Ver. 1.0
RTS Line State
This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select
Low RTS or High RTS line state.
Host: Low RTS
Host: High RTS
Beep on <BEL>
When this parameter is enabled, the decoder issues a beep when a <BEL> character is
detected on the serial line. <BEL> is issued to gain a user's attention to an illegal entry or
other important event.
Beep On <BEL> Character (Enable)
Do Not Beep On <BEL> Character
(Disable)
Note: A NULL character must be sent to the decoder before BEL to ensure the BEL character
is processed correctly.
208