BZ-TECH D-6448 Manual De Instrucciones página 251

Programming Guide S-100W - Ver. 1.0
Convert UPC-E1 to UPC-A
Enable this to convert UPC-E1 decoded data to UPC-A format before transmission. After
conversion, the data follows UPC-A format and is affected by UPC-A programming selections
(e.g., Preamble, Check Digit).
When disabled, UPC-E1 decoded data is transmitted as UPC-E1 data, without conversion.
Convert UPC-E1 to UPC-A
(Enable)
Do Not Convert UPC-E1 to
UPC-A (Disable)
EAN-8/JAN-8 Extend
When enabled, this parameter adds five leading zeros to decoded EAN-8 symbols to make them
compatible in format to EAN-13 symbols. When disabled, EAN-8 symbols are transmitted as is.
Enable EAN/JAN Zero
Extend
Disable EAN/JAN Zero
Extend
250