Tabla de contenido
Idiomas disponibles
Idiomas disponibles
.
2.
Remove all components from the carton.
Attach the Motor Bracket on the outside of the right grill bowl panel.
Align the two holes of the
Bracket with the holes on the grill bowl. Tighten securely using two Screws #10-24x3/4"
UNC, Plain
Washers and Nuts provided.
1111111111111111111
Rot. Screw #10-24x3/4"
UNC x2
Washer
©
Rot. Washer
x2
Outside of Left Grill Bowl Panel
#10-24 Nut
Rot. Nut #10-24 x2
Rot. Screw#10-24x3/4"
UNC
with washers
and nuts
Motor Bracket
.
Slide the Spit through the piece of meat or poultry and the Holding Forks onto each end of the Rotisserie
Spit. Adjust spacing between Holding Forks to accommodate
your food, then tighten the Thumbscrews
to keep the Holding Forks in position. Slide the Collar and Bushing onto the threaded end of the Spit.
Do not tighten the Collar Thumbscrew
until the Rotisserie
is placed into your grill.
Holding
Forks
Spit
Thumbscrew
1/4"x1/2"
Thumbscrew
1/4"x1/2"
Bushing
Rot.Thumbscrew
1/4"xl/2"
x3
22
Tabla de contenido
