Steren AMP-60 Manual De Instrucciones página 21

25.- Line in: Use this connectors to plug an external audio source with a high signal output level,
such as AM/FM tuner, tape deck, CD player, etc. Use sensitive input switches suitable for different
devices. You can connect devices with RCA connectors and non-balanced signals.
26.- Mic / Line channel (Mono): These are channels 1, 2 and 3 and you can connect low impedance
- balanced microphones to XLR connector. Into the ¼" connector you can plug a microphone or
line instrument. Do not connect a non-balanced microphone to XLR connectors, otherwise, the
amplifier and the microphone can be damaged.
27.- Phantom switch: If you move the switch to LINE position, you can connect an audio source
with a high output signal level in the channels 1, 2 and 3. Placing the switch into MIC position, the
channels 1, 2 and 3 can be used to connect a dynamic microphone with a low impedance. Finally,
if you place the switch to Phantom, the amplifier sends energy to PIN 2 and 3, being perfect to use
this connector to plug condensed microphones. We recommend to use this switch with the main
volume to the minimum.
28.- Balanced / non-balanced line out: These terminals can be used to connect other devices such
as amplifier, recorder, etc.
29.- Power amplifier output: use these terminals to wire the speakers.
8