Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CONTROLS
1.- Gain: This knob controls input gain. Turn clockwise and the input will
be increased. Turn counter clockwise and the input will be decreased.
2.- Treble: This knob adjust high frequencies. Use it to eliminate noises in
high frequencies or to enhance the sound of cymbals, or high harmonics
of human voice. The gain range goes from –10dB to 10dB, with a central
frequency of 10kHz.
3.- Bass: This knob set low frequencies. Enhances male voice and low
frequencies from guitars. The gain range goes from –10dB to +10dB,
with a central frequency of 100Hz.
4.- Mute: Press to mute the signal output of the selected channel.
5.- Mute LED: Lights on when mute button was pressed.
6.- Volume: Use this knob to control the volume level of the selected
channel. If you turn it to the right, the volume will raise, if you turn it to
the left, the volume level will decrease.
7.- Zone selector: Press the desired buttons to assign a zone. Whole
zones can be operated at the same time.
8.- Phone volume: Set the volume level of the device plugged to Phone
connector.
9.- Phone: The amplifier's audio signal can be sent to the connected
headphones.
1
GAIN
2
TREBLE
3
BASS
5
4
MUTE
6
0
10 VOL
Z1
Z2
7
Z3
Z4
Zona
Selector
8
PHONE
Volume
9
PHONE
5
Tabla de contenido
