Craftsman 320.17255 Manual De Operaciones página 20

ADJUSTING / MOVING THE BASE AND BLADE GUIDE ROLLERS
FOR SCROLLING cont. (Fig. 14, 15 and 16)
1. Unplug the saw.
//_ WARNING"
ALWAYS unplug saw from the power source BEFORE making
any adjustments or attaching accessories.
2. Move the Scrolling/Orbit control lever to
"Scrolling" position.
3. Remove the blade, (see page 15).
4. Use the bevel assist handle's built in
hex key tip to loosen the hex screw
in the base of the saw (see Fig. 16).
5. With the base loosened, push the base
back as far as it will go, then push up
and back on the blade guide rollers so
they move away from the blade position
in the blade holder (see Fig. 15).
6. Re-tighten the hex screw in the base.
7. Install the blade, (see Page 15).
8. Make sure the blade guide rollers are
away from the blade (See Fig. 15).
SCROLLING CONTROL
KNOB FEATURE (Fig. 17)
The scrolling feature allows the blade to be
rotated 360 ° . It is ideal for cutting curves,
designs and detailed pattern work.
1. To engage the scrolling function,
move the Scrolling/Orbit Control
Lever to the SCROLLING position.
2. Grasp the scrolling control knob
(see Fig. 17).
3. The scrolling control knob can
be rotated 360 ° to the left or
right while guiding the saw to
follow intricate cutting lines.
Fig. 16
Fig. 17
NOTE: The blade can be locked in any scrolling position within 360 ° by switching
the Scrolling/Orbit Control Lever to the "SMOOTH" position.
NOTE: After moving the lever into the scrolling position, turn the scrolling knob back
and forth to be sure the blade plunger assembly is locked into the desired position.
IMPORTANT: When you are manually scroll cutting, ALWAYS hold the saw handle in
one hand and rotate the scrolling knob with your other hand, while applying pressure
to the front of the saw so it does not jump out of the workpiece.
20