Operating In Spot Mode; To Enter Spot Mode; To Show A Sequence On The Spot Monitor; To Exit Spot Mode - Dedicated Micros system sprite Guia Del Usuario

Operating in Spot Mode

Spot mode is used to change the cameras displayed on the Spot monitor. The cameras can be displayed in full screen or as a full
screen sequence.

To enter Spot Mode

Press the mode key until the Spot mode is activated (indicated by the Spot LED illuminating on the front panel).
Press the key on the keyboard.
SPOT
To Change the Camera viewed on the Spot Monitor
Enter Spot Mode as detailed above.
Press the desired camera key to display it on the Spot monitor.

To Show a Sequence on the Spot Monitor

To start the sequence on the Spot monitor, first select Spot Mode as shown above, then press the Full key to start the sequence.
To Start the sequence on the Spot monitor, first select Spot Mode as shown above, then press the
To change the cameras in the Spot monitor sequence refer to the instuctions in Live and Play mode, page 34.

To Exit Spot Mode

To exit spot mode, press the mode key until you have entered the desired mode.
Pressing the ' ', '
LIVE RECORD
Version 1.0
' or ' ' keys will exit 'Spot Mode'.
PLAY
Operating in Spot Mode
key.
SEQUENCE
37