Activity System Setup; Dwell Time; Activity Record Method; Activity Record Speed - Dedicated Micros system sprite Guia Del Usuario

Activity System Setup

This menu is not displayed if the Activity detection option in the
Detection Periods menu is set to always off.
This menu is used to determine what action the multiplexer will take
when activity is triggered.

Dwell time

The dwell time is used to extend the time of the initial period of
activity. The dwell time range available is 00 to 99 seconds (the
default is 5 seconds).

Activity record method

An activity event can change the way in which the multiplexer
records, the available options are:
Interleave Cameras with activity are recorded more often than non-activity cameras by inserting additional images
from these cameras into the record sequence (default).
Exclusive Records images only from cameras with activity for the duration of the event.
Unchanged Cameras with activity do not affect the recording sequence.
On completion of all detected activity and associated dwell time periods the System Sprite will return to its normal multiplexing
sequence.

Activity record speed

The Activity record speed (Time lapse mode) can be configured to match that set up as the Alarm record speed (see
page 11). This is configured in conjunction with the Activity relay (R2) output to switch the VCR to its alarmed record
mode. The default setting is 'unchanged'.
Œ
To Navigate
Use the UP/Down keys to select Option
To Exit
Press the
MODE
Version 1.0
Dwell time
Activity record method
Activity record speed
Activity relay (R2)
Extended relay function
16:49:52
•
Use the Right key to enter Edit Field
or
key to select next Menu Press and Hold the
Activity System Setup
05 sec
Interleave
Unchanged
Close
Off
04/03/1999
Ž
Use the Up/Down keys to edit.
key to leave menus.
MODE
Activity System Setup
VEXT
27