Activity Camera Setup; Detection; Sensitivity; Activity Grid - Dedicated Micros system sprite Guia Del Usuario

Activity Camera Setup

This menu is used to setup activity detection parameters for each
individual camera input. Press the required camera key to edit that
cameras properties.

Detection

Allows activity detection to be disabled for the chosen camera. Default
setting is On.

Sensitivity

This option is used to set up the level of movement required to trigger
the activity detection alarm. The settings available are:
•
Indoor high (highest sensitivity, default).
•
Indoor low.
•
Outdoor high.
•
Outdoor low.
•
Very low (lowest sensitivity).

Activity grid

The System Sprite has an 8 by 16 activity detection grid, which can be adapted to produce a mask for each camera. Moving into
this field automatically brings up the instructions for setting up the activity grid. Press the mode key to enter the activity grid
set-up. Use the cursor keys to highlight a block and press a camera key to add or remove each block. On completion press mode
to return to the menu above.

Activity test

This option is used to test the sensitivity and activity grid set-up. Use this option to tune the activity detection system for each
camera. Moving into this field will display the selected camera full screen, with visual indication of the activity detected.
To Navigate Œ
Use the UP/Down keys to select Option
To Exit
Press the
MODE
Version 1.0
Camera 1
Detection
Sensitivity
Activity grid
Activity test
16:49:52
•
Use the Right key to enter Edit Field
or
key to select next Menu Press and Hold the
Activity Camera Setup
On
Indoor high
Setup
Walk test
Use camera keys to select the next camera
04/03/1999
Ž
Use the Up/Down keys to edit.
key to leave menus.
MODE
Activity Camera Setup
VEXT
29