Berner Easy Dot Manual De Instrucciones página 24

WARNING
The responsible body or operator should refer
to the instruction manual before use. If the
equipment is used in a manner not specified by
the manufacturer, the protection provided by
the equipment may be impaired.
- The device and its accessories are not allowed
to be changed or replaced, other than author-
ized by the manufacturer or his agent.
- Warning: Not to use the equipment of meas-
urements on mains circuit.
- Test on a known source of brake fluid before
and after use of the equipment to make sure
that the equipment is functioning correctly.
WARNING
- The instructions of the car manufacturer to
change the brake fluid must be strictly
followed.
- This applies regardless of the measurement
result obtained by this instrument.
- The measurement is considered as additional
information and does not replace the
manufacturer's instructions.
- To avoid contamination of the fluid due to
humidity, the container should be opened only
briefly and also frequent measurement has to
be avoided.
23