Ee. Adjusting And/Or Growing Your Seat Upholstery - Ki Mobility Little Wave Clik XP Manual De Instrucciones Y Garantía

V. SET UP & USE OF YOUR WHEELCHAIR
FF. Adjusting and/or Growing Your Seat Upholstery
1. Depth Adjustment
Your Clik seat upholstery can grow in depth by 2".
a. Lift rear flap of front seat upholstery piece from rear section of seat upholstery.
b. Reach under chair and pull down on front of rear upholstery, detaching flap from the front
seat upholstery section.
c. Remove Phillips head screws from rear upholstery section on each side of frame (Fig. 41:A).
d. Grab seat upholstery on each side and slide rear upholstery section towards rear of chair
until screw holes and seat upholstery slots align (Fig. 41:B).
e. Reinsert and tighten Phillips head screws (Fig. 41:A).
2. Seat Upholstery Tension Adjustment
a. Reach under seat upholstery to find the tension adjustable hook and loop flap. This should
be located on bottom right side of seat upholstery.
b. Loosen Phillips head screws on same side of seat upholstery as tension adjustable flap (Fig.
41:A).
c. Separate hook from loop on tension adjustable flap by pulling apart.
d. To tighten seat upholstery, pull tension adjustable flap towards opposite side of chair. To
loosen seat upholstery, apply pressure from top of seat upholstery towards ground.
e. When seat upholstery has reached desired level of tension, press hook and loop back
together.
f. Retighten Phillips head screws (Fig. 41:A).
Fig. 41
B
A
47