Armrest Warnings; Center Of Gravity Adjustment - Ki Mobility Little Wave Clik XP Manual De Instrucciones Y Garantía

Ocultar thumbs Ver también para Little Wave Clik XP:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

V. SET UP & USE OF YOUR WHEELCHAIR
G. Armrest Warnings
All Ki Mobility armrests are designed to detach from the chair and will not bear the weight
of this chair.
NEVER lift this chair by its armrests. The armrests will release and the user may fall.
Lift this chair only by non-detachable parts of the main frame.
WARNING: Failure to heed these instructions may result in a fall, tip-over or loss of control
causing severe injury to the user or others.
H. Center of Gravity Adjustment
The most important adjustment on your Clik wheelchair is the position of the rear axle.
You can adjust your center of gravity by moving the two camber mount clamps (Fig. 8:A) forward
or rearward on the seat tube (Fig. 8:B).
Moving the camber mount clamps forward shortens the wheelbase and lightens the front end,
making your chair more maneuverable. Moving the camber mounts rearward makes the chair
more stable and less likely to tip over rearward.
NOTE: Changes to the center of gravity may affect the rear seat height (see Clik - Rear Seat
Height Adjustment on page 31), toe-in / toe-out of the rear wheels (see Setting Toe to Zero on
page 25) and the squareness of the casters (see Caster Angle Adjustment on page 32). If you
change your center of gravity position, readjust all of these settings if necessary.
NOTE: Adjusting your chair's center of gravity will require readjusting the location of the wheel
locks (if provided). See Growing Your Clik in Width on page 43 for instructions on adjusting the
wheel locks.
Fig. 8
B
21
A

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Little wave clik xpe

Tabla de contenido