Tecnoinox TECNO74 Manual De Instrucciones página 5

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
Safety Thermostat
All frytop have a safety thermostat that cuts off the electric power
supply in case of anomalies.
Cleaning and care of the appliance
Do not wash the appliance with jets of water because if water gets into
the electric components it could cause the appliance and the safety
systems to malfunction!
If the appliance is not going to be used for a long period of time,
disconnect it from the mains and clean it with soapy water, rinse it off
and dry it carefully. Spread a thin layer of liquid paraffin on the surface.
Malfunctions
Malfunctions do not always depend on the quality of the components
used. These appliances are manufactured using top quality
components.
Malfunctions may be caused by voltage surges, dust and/or dirt getting
into the components.
Maintenance
No particular maintenance is necessary other than normal cleaning.
Ecology and environment
Our appliances are studied and optimised, with lab tests, to provide
high performance and yields. However, in order to reduce energy
consumption (electricity, gas and water), we suggest not using the
appliance for any length of time if it is empty or under conditions that
compromise optimum yield.
All packaging materials are environment-friendly. They can be kept
without creating problems or burnt in a waste incinerator plant. The
following plastic components can be recycled:
 Polyethylene: external packaging material and/or pluribol film
 Polypropylene: straps
PART 3 – CLEANING AND CAR OF THE APPLIANCE
GB/IE - 2 -
To turn the appliance on again, press button |E| fig.2. This must be done
by a specialised technician.
The warm heating unit must be cleaned every day with soapy water and
a liquid alkaline detergent.
Sauces are collected in drawer |B| fig.2; which should be emptied
daily.
In any case, if anomalies are noticed or suspected, turn the appliance off
and disconnect it from the mains. Call the authorised repair service.
Unauthorised persons should never attempt to repair the appliance, or
carry out maintenance. Tampering with the appliance voids the
warranty!
The appliance should be checked once a year by a repair service. For this
purpose a maintenance contract should be stipulated.
 Polystyrene foam: corner pieces, sheets and protection blocks
At the end of the appliance's useful life, dispose of it properly. 90% of
each appliance is made of metal (stainless steel, iron, aluminated sheet,
etc.) hence it can be recycled by the relative recycling organisations in
compliance with the standards in force in your country.
Prepare the appliance for disposal, so it cannot be used any more,
by removing the power cable and any locks to prevent anyone getting
locked inside accidentally.
Tabla de contenido
loading

Este manual también es adecuado para:

Ftl8e7

Tabla de contenido