GE RAK348R1 Instrucciones De Instalación página 7

INSTALLATION INSTRUCTIONS
9. Clean the mounting location. Install the four mounting post feet
into each corner hole on the underside of the receiver. Peel off
the adhesive backing from each foot. Locate and press the
receiver onto the unit, in the correct location, for either Models
with a Junction Box or Models without a Junction Box. See below
illustration to determine the correct location for your model type.
(If accidentally placed in the wrong location or if the receiver
needs to be moved, carefully pry each foot from the unit, apply
two-sided tape to the feet and relocate to the new location.)
REMOVE PLASTIC BAG/INSTRUCTIONS AND PLACE IT IN THE DRIP
TRAY (OR AN OBVIOUS LOCATION). RETAIN WITH UNIT FOR SERVICE
TECHNICIAN.
Models with a
Junction Box
Recommended mounting
location – Mount the
receiver to the side
of the Junction Box
NOTE: If replacement mounting feet are needed, they may
be ordered at www.mouser.com. Order part no. 561-LAD187.
10. Replace the access cover with the screw removed earlier.
11. Reinstall the room cabinet by hooking the top over the rail along
the unit top, then pushing it in at the bottom.
Models without
a Junction Box
OR
Recommended mounting
location – Mount the
receiver to the face of
the unit
7