Tabla de contenido
Idiomas disponibles
Idiomas disponibles
WARNINGS – PREVENTIVE MEASURES
- Attention: before using the machine, please completely read this operating manual.
- Keep this operating manual properly for future.
- Do not touch the unit or the power cord with wet hands.
- Unplug the unit in case of storm and when you are not going to use it for a long time.
- Place the unit in a dry place, away from dust and water splashes.
- Do not pull, twist or fold the power cord excessively.
- Do not wet the unit; do not use chemical products to clean it.
- WARNING: to prevent electric shock hazards, connect the unit to a proper power
source (grounded 230 V, 50/60 Hz).
- The machine features a precision circuit. Prevent fortuitous impacts and stresses that
could cause mechanical damage.
- Do not use the machine with a different product than alginate.
- Do not obstruct the ventilation grilles at the bottom of the unit.
- Remove any dirt or water remains from the cord connection.
- Unplug the unit immediately whenever you notice an unusual noise, smell or smoke.
- Do not install the unit near to heat sources.
- Do not use the unit in damp rooms or near inflammable materials (alcohol, solvents...).
- To prevent accidents, be cautious when using the unit.
- Always keep the lid closed when you don't use the unit.
- Always keep the device in idle mode (display off), except when mixing.
- Do not run the unit without impression material.
- Do not allow children or non-qualified personnel handling the unit.
- Choose a flat and firm surface to place the unit, away from heat or vibration sources.
- Do not dismount, repair or modify the machine.
- If you find a defective component or a problem do not use the machine.
- Contact the supplier for questions or detailed information about problems with the unit.
EN
Tabla de contenido
