Center Of Gravity Adjustment - Ki Mobility Rogue Manual De Instrucciones Y Garantía

V. SET UP & USE OF YOUR WHEELCHAIR
F. Center of Gravity Adjustment
The most important adjustment on your Rogue wheelchair is the position of the rear axle.
You can adjust your center of gravity by moving the two camber mount clamps (Fig. 4:A) forward
or rearward on the seat tube (Fig. 4:B).
Moving the camber mount clamps forward shortens the wheelbase and lightens the front end,
making your chair more maneuverable. Moving the camber mounts rearward makes the chair
more stable and less likely to tip over rearward.
NOTE: Changes to the center of gravity may affect the rear seat height (See Rear Seat Height
Adjustment on page 23), toe-in/toe-out of the rear wheels (See Setting Toe to Zero on page 22)
and the squareness of the casters (See Caster Angle Adjustment on page 24). If you change your
center of gravity position, readjust all of these settings as necessary.
NOTE: Adjusting your chair's center of gravity will require readjusting the location of the wheel
on page 31
locks (if provided). See Wheel Locks for instructions on adjusting the wheel locks.
Fig. 4
A
B
19