Tsunami - Center Of Gravity Adjustment - Ki Mobility TSUNAMI AL Manual De Instrucciones Y Garantía

V. SET UP & USE OF YOUR WHEELCHAIR
F. Tsunami - Center of Gravity Adjustment
The most important adjustment on your Tsunami wheelchair is the position of the rear axle.
NOTE: Changes to the center of gravity may affect the rear seat height (See Tsunami - Rear Seat
Height Adjustment on page 26), toe-in/toe-out of the rear wheels (See Setting Toe to Zero on
page 25), and the squareness of the casters (See Caster Angle Adjustment on page 28). If you
change your center of gravity position, readjust all of these settings if necessary.
NOTE: Adjusting your chair's center of gravity will require readjusting the location of the wheel
Wheel Locks on page 33
locks (if provided). See for instructions on adjusting the wheel locks.
You can adjust your center of gravity by moving the two camber mount clamps (Fig. 4:A) forward
or rearward on the seat tube (Fig. 4:B).
Moving the camber mount clamps forward shortens the wheelbase and lightens the front end,
making your chair more maneuverable. Moving the camber mounts rearward makes the chair more
stable and less likely to tip over rearward.
Fig. 4
B
A
20