Ki Mobility Rogue Manual De Instrucciones Y Garantía página 21

V. SET UP & USE OF YOUR WHEELCHAIR
F. Center of Gravity Adjustment
To adjust the center of gravity location (Fig. 5):
a. Remove both rear wheels.
b. Loosen the two screws (Fig. 5:C) and nuts that secure the camber mounts (Fig. 5:A and B)
to the seat tubes.
c. Slide the camber mounts forward or rearward along the seat tube to the desired hole loca-
tion.
d. Repeat on the other side.
e. Ensure the mounts on both sides of the frame are adjusted equally on both sides of the
frame before tightening all the screws and nuts.
f. Once the camber mount clamps are secured, attach the rear wheels, occupy the chair and
maneuver it with a spotter to get a feel for the new adjustment.
Fig. 5
B
WARNING: The more you move your rear wheels forward, the more likely your chair will tip over
backwards. Always make adjustments in small increments and check the stability of your chair
with a spotter to prevent a tip-over. We recommend that you use anti-tip tubes until you adapt to
the change and are sure you are not at risk to tip over.
DANGER: Failure to heed these warnings may cause serious injury or death.
20
A
C