Cushion Installation - Ki Mobility Rogue Manual De Instrucciones Y Garantía

Ocultar thumbs Ver también para Rogue:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

V. SET UP & USE OF YOUR WHEELCHAIR
T. Cushion Installation
a. The Rogue was designed to be used with a proper wheelchair cushion.
DANGER: Sitting for long periods of time without a proper wheelchair cushion can cause
pressure ulcers which can be serious in nature and result in death.
b. The standard sling upholstery is provided with loop Velcro type fastener strips. The cushion
being used should have hook Velcro type fasteners that can engage the loop of the seat
sling to keep the cushion from sliding out from under you. Ensure the cushion is securely
attached before transferring or sitting in the wheelchair.
c. A standard seat sling may not have been provided with your chair. Check with your wheel-
chair provider if an aftermarket replacement to the original equipment sling has been pro-
vided. If so, make you follow the instructions for use provided by the aftermarket
manufacturer.
WARNING: Failure to properly secure a cushion can cause it to slide out during use or transfers
and could result in a fall or loss of control and cause severe injury or death.
32

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Rogue ttl

Tabla de contenido