Basic Programme Selection - Speck BADU OmniTronic Traducción De Las Instrucciones Para El Manejo Originales

3.2.1

Basic programme selection

It is possible to choose from two different programmes:
• Interval-controlled – notification in display I
• Time-controlled – notification in display T
Interval-controlled
Interval control is the simplest method of telling the device which
function it should carry out. It is not necessary to specify a time for
the start of the backwash/rinse cycle or the filter time. The right
hand button on the housing must be pressed for 3 seconds. The
starting time for the backwash cycle and the filter time is then set
permanently. According to the factory settings, the filter duration is
set to 8 hours per day. The repetition cycle (in days) for the
backwash/rinse cycles can be chosen individually. The default
setting is 7 days.
05|2018
In the Language menu, various
languages can be set on the BADU
OmniTronic. The default setting is
German. There is a choice
between:
• German
• English
• French
• Dutch
• Spanish
The selected language will be
shown in the display with a
question mark and can be
confirmed using the OK key.
In the Info menu, details regarding
the firmware and the manufacturer
can be found.
Description
EN 17