Promax GV-698+ Manual De Instrucciones página 67

Colour pattern generator GV-698+
RGB YPbPr
Shows the type of outputs of the back panel R/Pr, G/Y and B/Pb
LOGO ON
With the LED ON one or two logos show up. These logotypes can modify their
location in the image. To that end one must continuously push the key LOGO
ON when it is activated until in the second line of display the following content
appears:
LOGO 1
With the encoder we can walk the different fields and confirm the one that we
intend. The field LOGO 1, lets you select LOGO 1 and LOGO 2, that is, top or
lower logotype. In field L/R we will move selected logotype towards the right or
the left by turning the encoder. In field U/D we will move the logotype up or
down by turning the encoder. If we want to store these new positions we will
have to store them in the memory position that we wish.
In order to recover the information of the second line of display press DISPLAY
SELECT.
SYNC G
With the LED turned on an impulse of synchronism is added to signal G/Y of the
back panel.
TXT on
With the LED turned on the teletext signal is activated (only in PAL B/G/D/K/I
and SECAM L systems).
IL
With the LED turned on the interlace is deactivated.
07/2018
L/R U/D
Page 23