Festo DGP B Serie Instrucciones De Utilizacion página 35

DGP(L)−...−B
9 Care and maintenance
Maintaining the band system:
Clean the band system if required with a soft cloth.
S
Cleaning agents: all non−abrasive media.
Lubricate the surface of the band system if it no longer has a layer of grease.
S
Grease type: LUB−KC1 (silicon−free) from Festo.
Lubricating the roller bearing of types DGPL−...:
1. Make sure that the lubrication intervals in accordance with Fig. 32 are
observed. If the device is not operated frequently, lubrication should take
place at the latest after 3 years.
Lubrication intervals and grease types
The first lubrication
The following interval with special grease LUB−KC1 (free of silicone)
Or:
The following interval with special grease LUB−RN2 (free of silicone)
Fig. 32
S Note that lubrication must be undertaken more often:
in dusty and dirty environments
with work strokes of < 50 mm
at speeds of > 2 m/s.
2. Exhaust the DGPL−... .
3. Lubricate the slide bearings at all
lubricating nipples aJ.
Special grease and grease gun with
pin−point nozzle as per "Accessories".
S Move the slide over the complete posi
tioning path during lubrication in order
to distribute the grease equally inside
the device.
4. Lubricate the surface of the band system if it no longer has a layer of grease
(grease type: see Fig. 32).
Festo DGP(L)−...−B 0609g English
DGPL−18−KF
aJ
DGPL−...−KF
aJ
Fig. 33
5000 km
400 km
5000 km
35