Playback; Selecting The Media To Playback; End Monitor - Denon Professional DN-501C Manual Del Propietário

Playback

ON/STANDBY
SHIFT

Selecting the media to playback

1
ON/STANDBY.
Press
The power of DN-501C is switched ON, and the display screen
lights.
2
While DN-501C is stopped or in cue, press
The media list is displayed.
Media List
CD
USB(None)
iPod/iPhone
• For details on the media list display contents, see "Displaying the
media list" (vpage 22).
3
Rotate the jog dial to select the media that you want
to play back, and press the jog dial.
LIST
• To change the playback folder, press the
control or select "File List" in the menu (vpage 20).
MEDIA
CUE
2
Playback
Rotate the jog dial to select the file that you want to
playback, and press
1
lights and playback starts.
MEDIA
.

End Monitor

In the cued state, press the jog dial while holding down
SHIFT.
• The end of the track is played back for the amount of time set in
"End Monitor" in Preset.
• When playback has completed, playback recues to the previous cue
point.
button on the remote
ENTER
Jog Dial /
3 1
1 .
23 23
n To stop playback
2
Press .
1 CUE
• Playback stops, goes out and lights.
• The playback position is moved to the playback start position set
for "Finish Mode" in the preset menu, and playback stops.
• The stop position can be changed in the "Finish Mode" settings
as shown below.
When Stop is set : Playback is stopped at the start of the folder
or disc.
When Next is set : Playback is stopped at the beginning of the
next file.
When Recue is set : Playback is stopped at the point where
playback was previously started.
n To pause playback
3
Press during playback.
3
• Playback is paused, and lights.
1
• Press again to restart playback.
n To return to the playback start position
CUE
Press during playback.
• Playback switches to cue standby at the playback start position.
3
Press
1
1
Press button Press button
button
During During
playback playback
Cue search operation
Press CUE
button
Disc position